Ardisam 5020D Instruções de Operação descarregar pdf (Página 13)

OPERATOR INSTRUCTIONS AND PARTS

CRT Models 6015V, 6015VCE, 6015BCE

Page 13

GetEarthquake.com

800-345-6007

TILLING TIPS

The key to successful tilling is to begin with a shallow cut on the rst pass, and

then work an inch or two deeper on each successive pass.

 

 

the detent pin in the highest hole of the drag stake (follow instructions

under Tilling section). This will allow for shallow tilling. With the drag

stake in this position, make several light passes over the area to be

tilled. Reset for deeper depths with successive passes.

 



rmly to the handlebars to control sudden lurches.

Immediately release the drive control lever if the tines jam or you strike a foreign

object. With drive control lever in neutral position, push throttle control to stop

position to stop the engine. Disengage the spark plug wire. When tines have

stopped, remove foreign objects and check for damage.

CULTIVATING TIPS



 

 

holes. This will allow for shallow cultivation necessary to turn over

weeds, and break up and aerate the soil.

EXTREME CAUTION MUST BE TAKEN IN SELECTING

TILLING DEPTH. IF YOU ATTEMPT TO TILL TOO

DEEPLY FOR SOIL CONDITIONS, THAT IS, WITH

THE DRAG STAKE IN TOO HIGH A POSITION,

LOSS OF CONTROL COULD RESULT.

IF REMOVING MATERIAL FROM THE TINES BY HAND,

STOP ENGINE AND REMOVE SPARK PLUG WIRE FIRST.

WARNING

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Sem comentários

Ardisam 5020D Instruções de Operação Página 13