Ardisam 5020D Instruções de Operação descarregar pdf (Página 7)

OPERATOR INSTRUCTIONS AND PARTS

CRT Models 6015V, 6015VCE, 6015BCE

Page 7

GetEarthquake.com

800-345-6007

forward drive safety control lever

detent pin

forward cable

recoil start

wheel lock pin

belt guard

depth regulator lever

FEATURES

ATTACH HANDLEBAR 6015VCE, 6015BCE, EUROPE

1. Locate handlebar extensions. (SEE FIGURE 1B)

2. Place handlebar extensions on outside of lower handlebar mount. Line

up the handlebar extension pieces with the lower handlebar mount as

shown in the decal located on the lower handlebar mount next to the

mounting location. (SEE PAGE 22)



washers onto bolts.

4. Start 3/8-16 nuts on each bolt.



washers onto bolts.

6. Start 3/8-16 nuts on each bolt.

7. Tighten 3/8-16 nuts on each of the 4 bolts connecting the handlebar

extensions to the lower handlebar.



handlebar mount.

    



10. Insert one 3/8-16 x 1 bolt for each side in lower holes.

11. Start 3/8-16 nuts on each bolt.

12. Insert one 3/8-16 x 1 bolt for each side in upper holes.

13. Start 3/8-16 nuts on each bolt.

14. Tighten 3/8-16 nuts on each of the 4 bolts connecting the handlebar

to the handlebar extension.

FILL ENGINE CRANKCASE

1. Add oil according to engine manual. Do not overll. Use a clean, high

quality detergent oil. Use no special additives with recommended oils.

Do not mix oil with gasoline. Oil level must be full. Check the oil level

by removing oil ll plug. Oil level should be up to the bottom of the ll

plug opening.

2. Always check oil level before starting engine. Refer to engine manual

for capacity and type of oil to use.

FIGURE 1B (For full drawing see page 26)

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentários a estes Manuais

Sem comentários

Ardisam 5020D Instruções de Operação Página 7

Comentários a estes Manuais